For  Additional  Savings   Please subscribe to our  newsletter  at bottom of page                        

Hitec HS-322HD (Standard Servo)

Shipping: $1.00 Each 
  • The HS-322HD Standard Heavy Duty Servo utilizes Hitec’s revolutionary Karbonite™ gear train which is four times stronger than our standard white nylon gears, and even after hundreds of thousands of cycles they don’t show any signs of wear. Karbonite™ gears and our custom IC make the HS-322HD a great choice for an economical sport servo.

    Control System: +Pulse Width Control 1500usec Neutral
    Required Pulse: 3-5 Volt Peak to Peak Square Wave
    Operating Voltage: 4.8-6.0 Volts
    Operating Temperature Range: -20 to +60 Degree C
    Operating Speed (4.8V): 0.19sec/60° at no load
    Operating Speed (6.0V): 0.15sec/60° at no load
    Stall Torque (4.8V): 42 oz/in (3.0 kg/cm)
    Stall Torque (6.0V): 51 oz/in (3.7 kg/cm)
    Current Drain (4.8V): 7.4mA/idle and 160mA no load operating
    Current Drain (6.0V): 7.7mA/idle and 180mA no load operating
    Dead Band Width: 5usec
    Operating Angle: 40 Deg. one side pulse traveling 400usec
    Direction: Clockwise/Pulse Traveling 1500 to 1900usec
    Motor Type: Cored Metal Brush
    Potentiometer Drive: 4 Slider/Direct Drive
    Bearing Type: Top/Resin Bushing
    Gear Type: Heavy Duty Resin
    360 Modifiable: Yes
    Connector Wire Length: 11.81" (300mm)
    Dimensions: See Schematics
    Weight: 1.52oz (43g)