EP - 76cc Twin Gas Engine (Without electric start)
Model: X-76cc-T
Displacement: 76cc (4.64 cu in)
Performance: 9.0 HP
Speed Range: 1600-7300 RPM (Test Propeller-24*9)
Bore: 39 mm (1.54 in)
Stroke: 32.5mm (1.28 in)
Static Thrust: 18.5 kg @ 100 m ALT (40.8 lb @ 328 ft ALT)
Static Thrust: 16.8 kg @ 1800 m ALT (37.1 lb @ 5900 ft ALT)
Compression ratio: 9:1
Lubrication ratio: 40:1 (Fuel: 2-Stroke Full Synthetic Oil)
Ignition Voltage: 6-14 V
Spark Plug Type: CM6 Iridium Spark Plug
Recommended Propeller: 22x10; 23x8; 23x10; 24x8 24 x 9
Weight of Main Engine: 1688g
Weight of Muffler Set: 174g (L&R Mufflers; Screws)
Total Weight: 2134g (4.7 lb)
Please note the warranty starts from the day you purchase the engine, not the day you first run it.
Based On 1 reviews.
I received my 76cc Twin August 17th and installed it in my Jungmeister BU133 the following day. To my total surprise it fired up on the 15th flip. No tuning needed as this engine runs like a Swiss Watch right out of the box. I've been RC Modeling for 54 years and have seen a lot of Engine Makers come & go. I hope Ephil does well as I am really impressed with their Fit and Finish.