Tired of drilling the four mounting bolts in your props for DLE Engines?
Install a single bolt prop adapter and all the 10mm single hole props will fit your engine
One bolt and your ready to fly.
**Adapters installed Free with engine purchase**
Based On 3 reviews.
I have one of these on both my DLE 30 and 35RA - one of the best purchases I've ever made - no need for a 4-bolt pattern on these motors - makes for such easy work if you need to replace a prop or remove the cowl. Keep in mind the new prop shaft is 10 mm.
I have had this on my DLE 30 for about 3 years. I don't know why they use four bolt when this works so well.
Been using this prop adaptor since 8/25/12 ,never had a problem with it.I would recommend it for 30-35 size engines,not 100% sure I would use it on larger engines.
Installation- I can not comment on installation because I purchased it with my DLE-35RA and Valleyview installed it .they did an outstanding job and if I buy another 30-35 size engine I would have them do it again.
BTW some helpful info shaft is 10mm , thread size is 10mmx 1.5 and total length of shaft from hub to tip is approx 2.125". The end of shaft is drilled and tapped for a 5mm x.8 allen head, or a in pinch a 10x32 screw could be use.