92" AJ Slick 540 - Red/White/Blue

92" AJ Slick 540

The 92" AJ Slick 540 boasts several impressive features that enhance its performance and appeal for aerobatic flying.

Aerobatic Design

• The aircraft is designed with a modern airfoil and an optimized aerobatics package, making it suitable for both pattern flying and extreme 3D maneuvers.

Control Requirements

• It requires at least a 6-channel RC set for effective control, emphasizing the need for precise servo setup and optimized rates.

Durability and Performance

• Equipped with high-torque servos (like the Savox SA1231SGP Coreless Digital Servo), it offers robust performance and assures quick response times for aggressive flying.

Aesthetic Appeal

• The sleek design not only enhances its flight capabilities but also attracts attention, with many pilots noting its impressive appearance in the air
  

Click Here for Manual

Specs:

• Wing Span - 92"
• Length - 88"
• AUW (dry) - 18lbs to 20lbs
• Gas Power - 60cc-70cc
• Electric Power 70cc Motor of choice 
• Radio - 6 channel with 5 high torque servos (400 oz./in minimum) & 1 throttle servo for gas power
• IMAC Legal!

• The center of gravity (CG) range for the 92" AJ Slick is located 1/2" in front of the wing tube (+/- 1/2")
• Aileron Control Throws
• Low Rates - 15 deg. (30% Exp)
• Mid Rates - 35 deg. (40% Exp)
• High Rates - 45 deg. (50% Exp)
• Elevator Control Throws
• Low Rates - 15 deg. (30% Exp)
• Mid Rates - 35 deg. (50% Exp)
• High Rates - 45 deg. (60% Exp)
• Rudder Control Throws
• Low Rates - 15 deg. (30% Exp)
• Mid Rates - 35 deg. (40% Exp)
• High Rates - Max Throw (50% Exp)

What's in the box:

• Pre-hinged, glued and sealed ailerons & elevators
• All Carbon Kevlar construction 
• Carbon Fiber main landing gear
• Carbon Fiber main wing tube
• Quick release Wings, Elevators, and canopy 
• Removable Rudder
• NEW! Heavy duty machined tail wheel  
• G10 fiberglass control horns
• Aluminum reinforced landing gear mounts
• Aluminum reinforced firewall
• Aluminum standoffs sized for DA70 & GP76
• Canister Tunnel 
• Heavy duty foam wheels with aluminum hubs
• Heavy duty steel axles
• Thick, heavy duty, pre-drilled wheel pants
• Pre-drilled & rubber lined landing gear cuffs
• Pre-drilled firewall 
• Pre-run rudder pull-pull wires (turnbuckle also included for push-pull option)
• High quality ball links & turnbuckles for all connections
• Extra hardware bag for spares
• Velcro for fuel tank or battery restraint