HS-635HB
The all new HS-635HB has taken the place of the HS-605BB. Dual ball bearing with Karbonite gear offer great durability and smooth operation. The servo has a Stall Torque of 83 oz/in. at 6v, also comes with a great set of heavy duty servo horns and arms including all mounting hardware.
![]()

$29.89 each
Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 3-5 Volt Peak to Peak Square Wave
Operating Voltage: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60 Degree C
Operating Speed (4.8V): 0.18sec/60° at no load
Operating Speed (6.0V): 0.15sec/60° at no load
Stall Torque (4.8V): 69 oz/in. (5.5kg.cm)
Stall Torque (6.0V): 83 oz/in. (6kg.cm)
Operating Angle: 45 Deg. one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900usec
Current Drain (4.8V): 5.3mA/idle and 400mA no load operating
Current Drain (6.0V): 6.6mA/idle and 500mA no load operating
Dead Band Width: 4usec
Motor Type: 3-Pole Ferrite
Potentiometer Drive: Indirect Drive
Bearing Type: Dual Ball Bearing
Gear Type: Karbonite Gears
Connector Wire Length: 11.81" (300mm)
Dimensions: 1.6" x 0.8"x 1.5" (40 x 20 x 39mm)
Weight: 1.83oz. (52.1g)