HS-5955TG

The HSC-5955TG is the ultimate standard size servo period! This servo was specifically designed for use in giant scale aircraft and high performance R/C vehicles. With an amazing 333 oz-in. of torque and Titanium gears packed in a standard size case it out performs any other servo in the marketplace. We also include a heavy duty carbon brush coreless motor wrapped in a metal heat sink center case to handle the harshest environment. The new upper case incorporates hardened pins for the gears with oilite bushings to allow these series of servos to take repeated punishment. Topping it off with gold-plated connectors, heavy duty wire and 8 rubber rings in the case offering excellent water and fuel resistance, the HSC-5955TG servo is in a league by itself.

,,,,, 333 0z/in. at 6v

 

$114.89 each

 

*Digital servos do not need to be programmed to operate. They work great right out of the box and purchasing a programmer is not necessary.

Control System: +Pulse Width Control 1500usec Neutral
Required Pulse: 4.8-6.0 Volt Peak to Peak Square Wave
Operating Voltage Range: 4.8-6.0 Volts
Operating Temperature Range: -20 to +60°C (-68F to +140F)
Operating Speed (4.8V): 0.19 sec/60° at no load
Operating Speed (6.0V): 0.15 sec/60° at no load
Stall Torque (4.8V): 249.96 oz-in. (18 kg.cm)
Stall Torque (6.0V): 333.29 oz-in. (24 kg.cm)
Standing Torque (4.8V): 324.95 oz-in. (23.4 kg.cm) 5° deflection
Standing Torque (6.0V): 433.27 oz-in. (31.2 kg.cm) 5° deflection
Operating Angle: 60° one side pulse traveling 400usec
360 Modifiable: Yes
Direction: Clockwise/Pulse Traveling 1500 to 1900 usec
Idle Current Drain (4.8V): 3mA at stop
Idle Current Drain (6.0V): 3mA at stop
Current Drain (4.8V): 220mA/idle and 3.4 amps at lock/stall
Current Drain (6.0V): 300mA/idle and 4.2 amps at lock/stall
Dead Band Width: 2 usec
Motor Type: Coreless Metal Brush
Potentiometer Drive: 6 Slider Indirect Drive
Bearing Type: Dual Ball Bearing MR106
Gear Type: 4 Titanium Gears
Connector Wire Length: 7" (178mm)
Dimensions: 1.57" x 0.78"x 1.45" (40 x 20 x 37mm)
Weight: 2.18oz (62g)