DL-50cc Gas Engine

Valley View RC is now the Factory Authorized distributor for DL engines

Dealers welcome

!!Note: The DL-50 has been updated to a DLE-55!!

Click here for the DLE-55

*************************************************************************************************8

One year warranty from our own Service Center

Call to order 253-875-6890

Or

 

This engine is a perfect fit for our Aeroworks and SD-Model 30% Airplanes

Valley View RC is a Factory authorized distributor for all DL Engines

All of our DL-50cc engines are new and come straight from the DL Factory in China.

Factory Authorized Parts in stock for fast USA repairs and service to our customers.

SPECIFICATIONS:

Automatic advancing electronic ignition ...............................................................,,,,,,,,,,,,,,,,,,,,,!"New In Stock now"

Performance... Output Power: 5.2HP at 7500rpm

Idle Speed: 1350 rpm Maximum Speed: 9000rpm

Static Thrust: 30lbs at 100 meters altitude 25lbs at 1800 meters

Dimensions... Displacement: 50.8cc

Bore and Stroke: 43mm×35mm

Compression Ratio: 7.5:1

Weight: Engine - 1350g

Exhaust - 100g Ignition - 120g

Requirements... Fuel: 2C Regular Gas mixed 32:1 - 45:1 (petroleum based for break in, synthetic thereafter)

Propeller: 22×8; 22×10; 23×8 .....See our Xoar Props in Stock

Ignition Battery: 4.8 to 6.0 Volts >=1200Mah

Replacement Spark plug: NGK CM6 with 0.018" to 0.020" gap

Configuration... 2Cycle air cooled

Walbro membrane pump carburetor

Comes complete with engine, muffler, Auto advancing electronic ignition and all new mounting hardware.

DL-100cc Engines also in Stock

--------------------------------------------------------------------------------------

Now in Stock

3-1/2" Aluminum Spinners for DL and DA 50cc engines. Spinners are drilled and come with mounting bolt.

Will accept up to 23 X 8 Prop.

--------------------------------------------------------------------------------------------------------------

Opto Gas Kill Switch

A must for all gas engine airplanes

Click Here

 

!!For our Australian friends please visit the DL Engine Distributor in your country!!

Click here

Customer Feedback:

We have 3 guys at the field flying DA's and others including ZDZ, a Stihl, and G62's and I think the DL runs smoother and as strong as any of them. It starts easier and has no mid-range burble. I still have the 22x8 on it right now but will be trying 22x10 and 23x8 soon.

 

ITs running like a clock. I have a little over 4 gallons run in it so far. Just changed it over to 50:1 Amsoil synthetic. Starts on the first flip everytime. I hate to adjust it anymore to get that slight burble out of it around idle to 1/4 throttle. IT runs so well.

Tom, sorry I didn't believe you when you told me how good this engine is but I am sure happy that I bought one. I am very happy with it and will be getting one of your combo's soon.

 


Valley View RC Home